Basic Info.
Power: Pneumatic
Standard or Nonstandard: Standard
Pressure: Low Pressure
Structure: Diaphragm
Material: Casting
Temperature of Media: Normal Temperature
Media: Gas
Brand Name: Others
Model No.: RCAC20FS4
Place of Origin: Qingdao
Min.Order: 10 Units
Means of Transport: Ocean, Air, Land
Construction
Body: Aluminium (diecast)
Ferrule: 304 SS
Armature: 430FR SS
Seals: Nitrile or Viton (reinforced)
Spring: 304 SS
Screws: 302 SS
Diaphragm Seat: PA-6 (standard), Viton coated mild steel or High Density PE Refer to Q Series Solenoid
product data sheet for solenoid construction details.
Operation
Recommended on time range: 50-500ms
Recommended time between pulses: 1 minute or greater
Weights:
Maintenance Kits
PERFORMANCE
NOMINAL PORT SIZE mm (in.) | NO. OF DIAPH. | FLOW KV (CV) | PRESSURE RANGE kPa (psi) | TEMPERATURE RANGE °C (°F) | |
SHOCKWAVE | VITON | ||||
20 (¾) | 1 | 19 (26) | 30(5) to | –40(–40) to | –29(–20.2) to |
860(125) | 82(179.6) | 232(449.6) | |||
Installation
1. Prepare supply and blowtube pipes to suit valve specification. Avoid installing valves underneath
the tank.
2. Ensure tank and pipes are free from dirt, rust or other particulate.
3. Ensure supply air is clean and dry.
4. Mount valves to inlet pipes and blowtube to valves, ensuring no excess thread sealant can enter the
valve itself.
5. Make electrical connections to solenoid or connect RCA pilot port to pilot valve (RCA valves only).
6. Apply moderate pressure to system and check for installation leaks.
7. Fully pressurise system.
8. Test fire and listen for proper actuation and crisp pulse noise.
Goyen RCAC20FS4 REVERSE PULSE JET VALVES
Goyen Flanged Dust Collector Pulse Jet Valve CA45FS
Goyen Pulse Valve
Optipow135 Jet Pulse Soleniod Valve
Optipow 105 Diaphragm Valves 3 inches Aluminum Pulse Soleniod Valve
OPTIPOW Jet Pulse Solenoid Valve
OPTIPOW Air Dust Collector Jet Pulse Valve
Optipow 105 Diaphragm Valves V1617803 V1617803 V1617803 3inches Aluminium Pulse Solenoid Valve
