Goyen Flanged Dust Collector Pulse Jet Valve CA45FS

Min. Order: 1

SUITABLE FOR

Dust collector applications, in particular for reverse pulse jet filter cleaning and its variations, including bag filters, cartridge filters and envelope filters, ceramic filters and sintered metal fibre filters.

CONSTRUCTION

Body: Diecast aluminium or 316 stainless steel

Ferrule: 305 SS

Armature: 430FR SS

Seals: Nitrile or Viton Spring: 304 SS

Screws: 302 or 304 SS

Outlet Slide Seal: EPDM or Viton Diaphragm Seat: PA-66 (standard), Viton coated mild steel

OPERATION

Recommended on-time range: 50–500 ms

Recommended time between pulses: 1 minute or greater

Basic Info

Size:

SIZE	OD mm	OD inches
1.5˝	48.3	1.900

Weight:

SIZE

INTEGRAL PILOT (CA)

kg (lb)

REMOTE PILOT (RCA)

kg (lb)

1.830 (4.03)

1.610 (3.55)

Maintenance Kits:

MODEL

NITRILE

VITON

INCLUDES

CA/RCA45FS

K4502

K4503 K4542

(Viton/SS) K4544

(Viton/SS Main Diaphragm only)

Diaphragm kits include main and secondary diaphragms and all springs.

Product Characteristics and Performance:

NOM. SIZE	PORT SIZE		NUMBER OF DIAPHRAGMS	FLOW		PRESSURE RANGE	TEMPERATURE RANGE °C °(F)
NOM. SIZE	mm	in	NUMBER OF DIAPHRAGMS	KV	CV	kPa (psi)	NITRILE SEALS	VITON SEALS
45	40	1.5	2	56	65	30(5)–860(125)	–40(–40) to 82(179.6)	–29(–20.2) to 232(449.6)

Product Description

Dimension:

Installation:

1. Prepare inlet flanges and blowtube pipes to suit valve specification. Avoid installing valves underneath the tank.

2. Ensure tank and pipes are free from dirt, rust or other particulate.

3. Ensure supply air is clean and dry.

4. Mount valves to inlet flange and blowtube to valves with all seals in place. Tighten flange bolts to 10Nm (7.4 ft–lbs) Ensure blowtube is pushed all the way into the valve outlet.

5. Tanks and pipes must be independently supported from valve.

6. Make electrical connections to solenoid or connect RCA pilot port to pilot valve (RCA valves only).

7. Apply moderate pressure to system and check for installation leaks.

8. Fully pressurise system.

9. Test fire and listen for proper actuation and crisp pulse noise.

Valve is not a structural component. Do not rely on valve to retain tanks or pipe. Where used, refer to DEINC-002 product specification for installation details.