High Qulity Sprocket Manufacturers (Standard America,KANA,Europen,ANSI Standard)
1. Produce strictly in accordance with standard dimension
2. Material: 1045 Steel / Alloy Steel / Stainless Steel 304 & 316
3. Standard: ANSI, DIN, JINS, ISO, KANA,Standard America or Customer's Drawing
4. Pilot bore, finished bore, taper bore and special bore.
5. Bright surface / high precision / Blacking /Electrophoretic-Coated
6. Advanced heat treatment and surface treatment craft
7. Best quality and competitive price.
8. Welcome OEM / ODM
9. Processing Equipment: Hobbing machine, Slotting machine, CNC lathes and other equipment.
10. Sprocket Models: Contains special sprocket according to customer's drawings, standard sprocket (American standard and metric).
INSTALLATION AND USING
The chain wheel, as a drive or deflection for chains, has pockets to hold the chain links with a D-profile cross section with flat side surfaces parallel to the centre plane of the chain links, and outer surfaces at right angles to the chain link centre plane. The chain links are pressed firmly against the outer surfaces and each of the side surfaces by the angled laying surfaces at the base of the pockets, and also the support surfaces of the wheel body together with the end sides of the webs formed by the leading and trailing walls of the pocket.
When fitting new chainwheels it is very important that a new chain is fitted at the same time, and vice versa. Using an old chain with new sprockets, or a new chain with old sprockets will cause rapid wear.
It is important if you are installing the chainwheels yourself to have the factory service manual specific to your model. Our chainwheels are made to be a direct replacement for your OEM chainwheels and as such, the installation should be performed according to your models service manual.
During use a chain will stretch (i.e. the pins will wear causing extension of the chain). Using a chain which has been stretched more than the above maximum allowance causes the chain to ride up the teeth of the sprocket. This causes damage to the tips of the chainwheels teeth, as the force transmitted by the chain is transmitted entirely through the top of the tooth, rather than the whole tooth. This results in severe wearing of the chainwheel.
FOR CHAIN STANDARDS
Standards organizations (such as ANSI and ISO) maintain standards for design, dimensions, and interchangeability of transmission chains. For example, the following Table shows data from ANSI standard B29.1-2011 (Precision Power Transmission Roller Chains, Attachments, and Sprockets) developed by the American Society of Mechanical Engineers (ASME). See the references for additional information.
ASME/ANSI B29.1-2011 Roller Chain Standard SizesSizePitchMaximum Roller DiameterMinimum Ultimate Tensile StrengthMeasuring Load25
|ASME/ANSI B29.1-2011 Roller Chain Standard Sizes|
|Size||Pitch||Maximum Roller Diameter||Minimum Ultimate Tensile Strength||Measuring Load|
|25||0.250 in (6.35 mm)||0.130 in (3.30 mm)||780 lb (350 kg)||18 lb (8.2 kg)|
|35||0.375 in (9.53 mm)||0.200 in (5.08 mm)||1,760 lb (800 kg)||18 lb (8.2 kg)|
|41||0.500 in (12.70 mm)||0.306 in (7.77 mm)||1,500 lb (680 kg)||18 lb (8.2 kg)|
|40||0.500 in (12.70 mm)||0.312 in (7.92 mm)||3,125 lb (1,417 kg)||31 lb (14 kg)|
|50||0.625 in (15.88 mm)||0.400 in (10.16 mm)||4,880 lb (2,210 kg)||49 lb (22 kg)|
|60||0.750 in (19.05 mm)||0.469 in (11.91 mm)||7,030 lb (3,190 kg)||70 lb (32 kg)|
|80||1.000 in (25.40 mm)||0.625 in (15.88 mm)||12,500 lb (5,700 kg)||125 lb (57 kg)|
|100||1.250 in (31.75 mm)||0.750 in (19.05 mm)||19,531 lb (8,859 kg)||195 lb (88 kg)|
|120||1.500 in (38.10 mm)||0.875 in (22.23 mm)||28,125 lb (12,757 kg)||281 lb (127 kg)|
|140||1.750 in (44.45 mm)||1.000 in (25.40 mm)||38,280 lb (17,360 kg)||383 lb (174 kg)|
|160||2.000 in (50.80 mm)||1.125 in (28.58 mm)||50,000 lb (23,000 kg)||500 lb (230 kg)|
|180||2.250 in (57.15 mm)||1.460 in (37.08 mm)||63,280 lb (28,700 kg)||633 lb (287 kg)|
|200||2.500 in (63.50 mm)||1.562 in (39.67 mm)||78,175 lb (35,460 kg)||781 lb (354 kg)|
|240||3.000 in (76.20 mm)||1.875 in (47.63 mm)||112,500 lb (51,000 kg)||1,000 lb (450 kg|
WHY CHOOSE US
1. Reliable Quality Assurance System
2. Cutting-Edge Computer-Controlled CNC Machines
3. Bespoke Solutions from Highly Experienced Specialists
4. Customization and OEM Available for Specific Application
5. Extensive Inventory of Spare Parts and Accessories
6. Well-Developed Worldwide Marketing Network
7. Efficient After-Sale Service System
The 219 sets of advanced automatic production equipment provide guarantees for high product quality. The 167 engineers and technicians with senior professional titles can design and develop products to meet the exact demands of customers, and OEM customizations are also available with us. Our sound global service network can provide customers with timely after-sales technical services.
We are not just a manufacturer and supplier of sprocket, but also an industry consultant. We work pro-actively with you to offer expert advice and product recommendations in order to end up with a most cost effective product available for your specific application. The clients we serve worldwide range from end users to distributors and OEMs. Our OEM replacements can be substituted wherever necessary and suitable for both repair and new assemblies.